Buy with the official UK distributor and receive a genuine product, a two-year warranty, free updates and free expert advice from an iCarsoft tech for life.
iCarsoft Professional Multi-system Auto Diagnostic Tool VOL V2.0 for Volvo/Saab, the Update version for iCarsoft VOL II.
iCarsoft VOL V2.0 is a Professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc. With a 4.0” TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850etc.Itenables technicians to accurately diagnose complex problems.
Based on VOL II, more functions are added to VOL V2.0:
ABS Bleeding
Injector Coding
BMS reset
Battery Voltage Test
Data Print
Notice:
iCarsoft VOL V2.0 scanners just work on Volvo/Saab with OBD II protocol,
if your Volvo were produced before year2005 or after year 2017,
or your Saab were produced before year2005 or after year 2012,please kindly confirm with us about the compatibility before purchasing !
Not all functions are supported on all years/models, because certain functions may be limited from the specific vehicle condition.
If you want to test any certain functions, please kindly confirm with us.
Product Features:
- iCarsoft VOL V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
- Applies to the single Brand of most models of Volvo/Saab which equipped with OBDII-16 DLC
- Support OBDII/EOBD Ten Modes of Operation
- Full System Diagnosis
- Read &Clear DTC
- Read Live Data
-
Support special functions: Oil Service Reset, EPB Reset, DPF reset, SAS Reset, ETCs reset, BMS Reset, ABS Bleeding and Injector Coding
-
Support Data Review
-
The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
-
Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
- DTC Library to look up when user is operating this tool.
- Easy To Use With Silicone Keys
- Full Speed Upgrade Via USB2.0
- 0″TFT LCD, 480*320 Pixels
- Multi-language: Multi-language: English, French, Deutsch, Spanish, Dutch, Italian, Czech, Hungarian, Polish, Swedish, Finnish, Portuguese, Russian, Danish, Norwegian
Special functions:
*** Varies across year and model ***
Oil Service Reset Function:
The VOL V2.0 allow you to reset Oil Service in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.
EPB Reset Function:
This electric parking brake (EPB) function has a multitude of uses to maintain the electronic braking systems safely and effectively.
The applications include deactivating/activating the brake control system, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or pad replacement and also reading and clearing EPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU.
SAS Reset Function: (Not supported on Saab)
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated. The iCarsoft VOL V2.0 will allow you to carry out steering angle re-calibration on supported models.
ETCs Reset Function:
Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve.
BMS Reset Function: (Not supported on Saab)
Battery Management System (BMS), registers new battery to the BMS while battery replacement.
ABS Bleeding:
ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
Injector Coding: (Not supported on Saab)
Injector coding, relearn the injector control parameter while the injector renewed or replaced
VOL V2.0 vehicle coverage of Volvo/Saab:
(If your vehicles are before 2004 year, please make sure your vehicles are OBDII compliant firstly)
Volvo:
S60
S60(11-)
S70
S80(-06)
S80(06-)
V70(-00)
V70(00‐08)
V70(08-)
XC90
XC90(V8)
S40(04‐)
C70 Coupe
C70 Conv
V50
V70 XC(01-)/XC70(-07)
XC70(08‐)
V70 XC(‐00)
C30
C70(06‐)
XC60
V60
Saab:
Saab 9-3
Saab 9-3 Sport
Saab 9-4X
Saab 9-5 (I)
Saab 9-7X
SPCIFICATIONS:
Display: 4.0″TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V(Typical)
Power Consumption: 1.8W(Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
CONTENTS:
VOL V2.0 Main Unit
Main Cable
Data Cable
TF Card
User Manual
Nylon carry case
Supported Languages:
Multi-language: English, French, Deutsch, Spanish, Dutch, Italian, Czech, Hungarian, Polish, Swedish, Finnish, Portuguese, Russian, Danish, Norwegian
Updates:
ICarsoft are continuously adding new functions and extending the coverage of their software. Remember, updates are free for life.
Please follow the link here and download the latest application.
Supported Languages
Multi-language: English, French, Deutsch, Spanish, Dutch, Italian, Czech, Hungarian, Polish, Swedish, Finnish, Portuguese, Russian, Danish, Norwegian
Updates
ICarsoft are continuously adding new functions and extending the coverage of their software. Please update the device before use. Remember, updates are free for life.
Please follow the link here and download the latest application.